CAD-CUT® Adhesive for Foil Heat Transfer Vinyl (HTV)
Material Overview
Heat transfer foils are known for being short-term embellishments when added to transfer papers and plastisol inks. This heat transfer foil adhesive solves that problem, permanently binding the foil, giving foil-embellished designs a long life. Laser cutter compatible. Use with Heat Transfer Foil to create eye-catching designs.
**Please note, this listing is for the adhesive only. You will need to purchase the foil separately.**
Material Specifications
- Easy, inexpensive way to create high-end fashion wear
- No need to screen print a base layer for foil - just cut, apply, and foil
- Arrives on a carrier for use with your vinyl cutter
- Handles fine detail for intricate foil embellishments
- Available in 20" and 11.8" (the same width as most heat transfer foils) rolls
- Safety: CPSIA Certified
- Laser cutter compatible
Adhesive Application Instructions
- Time: 3-5 seconds
- Temperature: 300°F/149°C
- Pressure: Light (20 psi)
- Peel: Hot
Foil Application Instructions
- Time: 8-10 seconds
- Temperature: 300°F/149°C
- Pressure: Firm (60-70 psi)
- Peel: Cold
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- 100% Preshrunk Cotton
- Cotton/Poly Blends
Print/Cut Instructions
- Cut design from CAD-CUT® Adhesive, with adhesive side facing up
- Weed away excess material and follow Adhesive application instructions
- With colored side facing up, lay a slightly larger piece of Foil over applied design
- Use a cover sheet and follow Foil application instructions
- Once peeled, Foil adheres to the Adhesive only